Dive tanks & valves
Compressed air cylinders made of steel, which are used for diving, still have to go to the TÜV every two years; Aluminum bottles only every 6 years.
We carry diving equipment made of steel (painted and hot-dip galvanized) or aluminum with valves. As a double device also with clamps and expandable valve.
FABER - diving device 10l 200Bar SteelBeast without valve + foot
€249.00*
Tanks:
10 Liters
Highly tempered steel is immersed in a liquid, hot zinc bath, a metallurgical solid connection is created and this offers the highest level of corrosion protection and is extremely resistant. These hot-dipped hot-dip galvanized bottles are lighter in weight, no paint, no scratches.
The new hot dipped bottles are shiny silver / gray with various color nuances and an irregular surface structure. The bottles darken after a short time.
Characteristics:
Variant: 10L, 12L long, 12L short, 15Lonly bottle body, without valve and foot
232 bar
Galvanized
The following information applies to hot dipped bottles in addition to our general operating instructions for steel bottles or diving equipment:
The bottle must not be painted. Only where the next stamp comes after a repeat test may the spot be repaired using zinc paint.
Feet are easier to assemble / disassemble if they have been previously immersed in 50 degree warm water.
The breathing gas to be filled must be dry and free of impurities.
Always rinse the bottle with plenty of fresh water after use. If necessary, the bottle can be cleaned with a nylon bust and water. Never use acidic cleaning agents. Storage must take place in a dry environment.
Do not use sandpaper, files, or any other tool to remove material from the bottle.
Do not attempt to hot dip galvanize other steel bottles. The hot-dip galvanizing of steel bottles requires a special quality of the steel used and the corresponding know-how.
%
FABER - diving device 200Bar steel bottle without valve + foot
€269.00*
€299.00*
(10.03% saved)
Tanks:
7 Liters
Breathing gas diving device 200 bar from Faber. The bottle is delivered without a foot, without a valve and unfilled. Painted in white as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Variants: 5L, 7L steel
only bottle body, without valve and foot
200 bar
painted white
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
Variants from €219.00*
%
FABER - diving device 200Bar SteelBeast bridge valve 12544 left or right
€399.00*
€429.00*
(6.99% saved)
Tanks:
10 Liters
|
Type:
right
Highly tempered steel is immersed in a liquid, hot zinc bath, a metallurgical solid connection is created and this offers the highest level of corrosion protection and is extremely resistant. These hot-dipped hot-dip galvanized bottles are lighter in weight, no paint, no scratches.
The new hot dipped bottles are shiny silver / gray with various color nuances and an irregular surface structure. The bottles darken after a short time.
Characteristics:
Variant: 10L, 12L long
200 bar
Galvanized
Polaris bridge valve 12544 right or left
EN 144-1
G5 / 8 inch connection thread
The following information applies to hot dipped bottles in addition to our general operating instructions for steel bottles or diving equipment:
The bottle must not be painted. Only where the next stamp comes after a repeat test may the spot be repaired using zinc paint.
Feet are easier to assemble / disassemble if they have been previously immersed in 50 degree warm water.
The breathing gas to be filled must be dry and free of impurities.
Always rinse the bottle with plenty of fresh water after use. If necessary, the bottle can be cleaned with a nylon bust and water. Never use acidic cleaning agents. Storage must take place in a dry environment.
Do not use sandpaper, files, or any other tool to remove material from the bottle.
Do not attempt to hot dip galvanize other steel bottles. The hot-dip galvanizing of steel bottles requires a special quality of the steel used and the corresponding know-how.
FABER - diving device 200Bar SteelBeast Twinventil 12944
€489.00*
Tanks:
12 Liters tal
Highly tempered steel is immersed in a liquid, hot zinc bath, a metallurgical solid connection is created and this offers the highest level of corrosion protection and is extremely resistant. These hot-dipped hot-dip galvanized bottles are lighter in weight, no paint, no scratches.
The new hot dipped bottles are shiny silver / gray with various color nuances and an irregular surface structure. The bottles darken after a short time.
Characteristics:
Variant: 10L, 12L long, 12L short
200 bar
Galvanized
Twin valve 12944
Chromed brass
232 bar suitable
Screw-in thread M25x2
Connection thread DIN G5 / 8
The following information applies to hot dipped bottles in addition to our general operating instructions for steel bottles or diving equipment:
The bottle must not be painted. Only where the next stamp comes after a repeat test may the spot be repaired using zinc paint.
Feet are easier to assemble / disassemble if they have been previously immersed in 50 degree warm water.
The breathing gas to be filled must be dry and free of impurities.
Always rinse the bottle with plenty of fresh water after use. If necessary, the bottle can be cleaned with a nylon bust and water. Never use acidic cleaning agents. Storage must take place in a dry environment.
Do not use sandpaper, files, or any other tool to remove material from the bottle.
Do not attempt to hot dip galvanize other steel bottles. The hot-dip galvanizing of steel bottles requires a special quality of the steel used and the corresponding know-how.
Variants from €459.00*
%
FABER - double diving device 2x7l 200Bar steel bottles 14mm / 40mm bridge valves 12544
€699.00*
€824.00*
(15.17% saved)
tank distance:
14 mm
The Underwater-No1 practical test has proven that there is nothing more convenient than a double diving device! Breathing gas steel bottles 200 bar with lockable bridge from Farber. Paint as shown. The bottles have no feet but are equipped with 2 pieces of stainless steel clamps, 6cm wide including bolts. Breathing gas diving equipment must be labeled with the gas that is being filled.
For the correct bottle spacing, please contact us before ordering.
Characteristics:
Variant: 7L
Scope of delivery:
2 x Faber - 7L diving bottle 200bar
Bridge valve on the right
Bridge valve on the left
lockable bridge
Stainless steel clamp set 6mm with screw connection
Installation
MES - diving device 2l 200Bar aluminum bottle without / with valve
€249.00*
Tanks:
Monovalve 12144
High-quality aluminum bottles for use as diving equipment are manufactured in ultra-modern production facilities and in accordance with the requirements of the European Pressure Equipment Directive. Various parameters were taken into account in the construction, which guarantee an excellent water position and an exclusive design. The aluminum bottles are delivered without a foot.
Characteristics:
Variants: without valve, with Polaris mono valve 12144 or 12800
Material: aluminum
Single valve without, 12144 or 12800 valve
Bottle diameter: 102mm
Weight: 2.6kg
Length: 40cm
Paintwork: black
Exit: G 5/8
High pressure SCUBA cylinders made of aluminum 6061-T6, manufactured by MES, range from 0.5 l pony to 11.1 l high performance. SCUBA cylinders made of aluminum alloy are manufactured in accordance with the construction standard ISO 7866 and the directive 2014/68 / EU (PED).
Variants from €165.00*
MES - diving device 3L 200Bar aluminum bottle without / with valve
€229.00*
Tanks:
Monovalve 12144
|
Type:
right
High-quality aluminum bottles for use as diving equipment are manufactured in ultra-modern production facilities and in accordance with the requirements of the European Pressure Equipment Directive. Various parameters were taken into account in the construction, which guarantee an excellent water position and an exclusive design. The aluminum bottles are delivered without a foot.
Characteristics:
Variants: without valve, with Polaris mono valve 12144 left / right or 12400 left / right
Material: aluminum
Mono valve without, 12144 or 12800 valve (side selectable)
Bottle diameter: 117mm
Weight: 4.0kg
Length: 46cm
Color: natural
Exit: G 5/8 at 12144
Exit: M26x2 at 12400
NITROXHigh pressure SCUBA cylinders made of aluminum 6061-T6, manufactured by MES, range from 0.5 l pony to 11.1 l high performance. SCUBA cylinders made of aluminum alloy are manufactured in accordance with the construction standard ISO 7866 and the directive 2014/68 / EU (PED).
Variants from €179.00*
%
POLARIS - barrier bridge short 12544-140 / 171/204 300Bar
€79.95*
€89.00*
(10.17% saved)
Tanks:
171 mm
Shut-off bridge for connecting the bridge valves when building double devices. Approved according to EN 144-1 to 300bar operating pressure.
Properties:
Handwheel in the middle
Bridge up to 300 bar
EN 144-1
Chromed brass
Screw-in thread O-ring sealed
Available in 3 different lengths for the following bottle diameters:
Bridge lengths according to valve distance (middle-middle)
short = 155mm (5 liters + 7 liters)
medium = 185mm (10 liters + 12 liters long)
long = 215mm (12 liters short + 15 liters
POLARIS - bottle protection net 5-15 liters black / yellow
€12.95*
Color:
yellow
|
Tanks:
10 Liters
Solid bottle protection net for your compressed air bottle. Protects the bottle from scratches and thereby increases its longevity.
Available in different sizes and colors!
Material:
robust nylon
Colors: black or yellow
Scope of delivery:
Bottle protection net
2 fastening cords.
Variants from €8.95*
%
POLARIS - Bridge valve 232 bar 25x2 handwheel left / right 12544
€84.95*
€89.00*
(4.55% saved)
Type:
left
Solid expandable 232 bar bridge valve with DIN connection thread and non-slip rubberized handle. Essential for the expansion of the mono bottle to a double device.
Properties:
Variants: Right / Left
Bridge valve 232 bar
EN 144-1
G5 / 8 inch connection thread
Chromed brass
Screw-in thread cylindrical M 25x2 O-ring sealed
Scope of delivery:
Bridge valve left or right
O-ring
POLARIS - clamp set V4-Tec from 140mm- 204mm distance
€159.00*
Tanks:
171mm - tank spacing 14mm
Pair of clamps made of V4A stainless steel with bolts for PTGs in various diameters. Ideal for the construction of double devices with bottle spacing.
Order sizes:
Bottle diameter in mm / bottle spacing in mm
Scope of delivery:
2 clamps
Screw set
POLARIS - diving device 232Bar steel bottle bridge valve 12544 left or right concave
€293.00*
Tanks:
12 Liters tal
|
Type:
left
Breathing gas diving device 232 bar with bridge valve on the left or right and corresponding foot. Paint as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Diving bottle suitable for all gases
Material: steel
concave
Valve oxygen-free, suitable for all gases
Bridge valve 232 bar right / left
Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 232bar
Exit: G 5/8
Scope of delivery:
Diving bottle acc. ordered size
Bottle base to match the body
Polaris bridge valve 12544
Installation
operation manual
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free.
POLARIS - diving device 232Bar steel bottle mono valve 12144
€399.00*
Tanks:
12 Liters short
Breathing gas diving device 232 bar and expandable DIN valve 12144 from Polaris. The bottle is delivered unfilled with the appropriate foot. Paint as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Diving bottle suitable for all gases
Material: steel
Valve oxygen-free, suitable for all gases
Extendable valve
Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 232bar
Exit: G 5/8
Scope of delivery:
Diving bottle acc. ordered size
Bottle base to match the body
Polaris valve 12144 expandable
Installation
operation manual
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free.
Variants from €309.00*
POLARIS - diving device 232Bar steel bottle monoventil 12144 concave
€278.30*
Tanks:
8,5 Liters
Breathing gas diving device 232 bar and expandable DIN valve 12144 from Polaris. The bottle is delivered unfilled with the appropriate foot. Paint as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Diving bottle suitable for all gases
Material: steel
Valve oxygen-free, suitable for all gases
Extendable valve
Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 232bar
Exit: G 5/8
Scope of delivery:
Diving bottle acc. ordered size
Bottle base to match the body
Polaris valve 12144 expandable
Installation
operation manual
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free.
Variants from €272.00*
POLARIS - diving device 232Bar steel bottle without valve + foot
€299.00*
Tanks:
8 Liters
Breathing gas diving device 232 bar from Polaris (ecs). The bottle is delivered without a foot, without a valve and unfilled. Painted in white as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Variants: 8L, 10L, 12L long, 12L short, 15L
only bottle body, without valve and foot
232 bar
painted white
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
Variants from €279.00*
POLARIS - diving device 232Bar steel bottle without valve + foot concave
€225.80*
Tanks:
8,5 Liters
Breathing gas diving device 232 bar from Polaris. The bottle is delivered without a foot, without a valve and unfilled. Paint as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Variant: 8L, 12L long
only bottle body, without valve and foot
232 bar
painted white
concave
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
POLARIS - diving device 300Bar steel bottle bridge valve 12888 left or right
€324.50*
Tanks:
8 Liters
|
Type:
left
Breathing gas diving device 300 bar latest production with bridge valve from Polaris. The bottle is delivered unfilled with the corresponding valve 12888 left / right and base. Paint as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Diving bottle suitable for all gases
Material: steel
Valve oxygen-free, suitable for all gases
Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 300 bar
Bi-valve 300 bar right / left
G5 / 8 inch connection thread
Scope of delivery:
Polaris diving bottle and valve acc. ordered size
Bottle base to match the body
Bridge valve 12888 right or left
Installation
operation manual
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
Variants from €303.50*
%
POLARIS - diving device 300Bar steel bottle mono valve 12999
€399.00*
€459.00*
(13.07% saved)
Tanks:
12 Liters tal
Breathing gas diving device 300 bar latest production with mono valve from Polaris. The bottle is delivered unfilled with the corresponding valve 12999 and stand. Paint as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Diving bottle suitable for all gases
Material: steel
Valve oxygen-free, suitable for all gases
Mono valve 12999Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 300 bar
Scope of delivery:
Polaris diving bottle acc. ordered size
Bottle base to match the body
Polaris mono valve 12999 300 bar
Installation
operation manual
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
Variants from €329.00*
POLARIS - diving device 300Bar steel bottle without valve + foot
€261.50*
Tanks:
10 Liters
Breathing gas diving device 300 bar from Polaris (ecs). The bottle is delivered without a foot, without a valve and unfilled. Painted in white as shown. Breathing gas diving equipment must be labeled with the gas that is being filled.
Characteristics:
Variants: 7L, 8L, 10L, 12L long
only bottle body, without valve and foot
300 bar
painted white
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
Variants from €219.50*
POLARIS - Double Diving Device 232Bar Steel Bottles Bridge Valves 12544
€899.00*
Tanks:
12 Liters tal
The Underwater-No1 practical test has proven that there is nothing more convenient than a double diving device! Breathing gas steel bottles 232 bar latest production with lockable bridge from Polaris. Paint as shown. The bottles have no feet but are equipped with 2 pieces of stainless steel clamps, 6cm wide including bolts. Breathing gas diving equipment must be labeled with the gas that is being filled.
For the correct bottle spacing, please contact us before ordering.
Characteristics:
Variants: 10L / 14mm, 12L long / 14mm
Diving bottles suitable for all gases
Material: steel
Valve oxygen-free, suitable for all gases
Bridge valve 12544 expandable 232bar
Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 232 bar
Bottle spacing 14mm
Stainless steel clamps V4-TecScope of delivery:
2 x diving bottle acc. ordered size
Bridge valve 232 bar on the right
Bridge valve 232 bar on the left
lockable bridge 232 bar
Stainless steel clamp set 6mm with screw connection
Installation
operation manual
For shipping reasons, the device is disassembled and delivered in two packages.
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
Variants from €849.00*
POLARIS - double diving device 300Bar steel cylinders 14mm // 40mm bridge valves 12888li / right
€879.00*
Tanks:
10 Liters
|
tank distance:
14 mm
The Underwater-No1 practical test has proven that there is nothing more convenient than a double diving device! Breathing gas steel bottles 300 bar latest production with lockable bridge from Polaris. Paint as shown. The bottles have no feet but are equipped with 2 pieces of stainless steel clamps, 6cm wide including bolts. Breathing gas diving equipment must be labeled with the gas that is being filled.
For the correct bottle spacing, please contact us before ordering.
Characteristics:
Diving bottles suitable for all gases
Material: steel
Valve oxygen-free, suitable for all gases
Bridge valve expandable 300bar
Bottle has 2.5 years TÜV from the date of manufacture
flame-spray galvanized inside
outside painted twice
Color outside: pure white
Operating pressure 300 bar
Bottle spacing 14mm or 40mm
Stainless steel clamps V4-Tec
Scope of delivery:
2 x diving bottle acc. ordered size
Bridge valve 300 bar on the right
Bridge valve 300 bar on the left
lockable bridge 300 bar
Stainless steel clamp set 6mm with screw connection
Installation
operation manual
For shipping reasons, the device is disassembled and delivered in two packages
All complete diving devices are available with a TÜV test of the assembly (commissioning) and stickers for the next repeat test. Individual bottle bodies only have a declaration of conformity. When delivered, all diving equipment is oxygen-free. For logistical reasons, 18 L bottles and double devices are not shipped or only partially assembled.
%
POLARIS - Mini stand 110mm - 204mm
€17.95*
€20.00*
(10.25% saved)
Size:
204mm
Non-slip bottle base in black by Polaris with water drain.
Sizes:
110 mm
140 mm
171 mm
204 mm
Color: Black
Variants from €11.95*
%
POLARIS - Mono valve expandable 12144 232Bar M25x2
€72.95*
€82.00*
(11.04% saved)
Type:
right
Solid expandable 232 bar valve with a non-slip rubber handle that has proven itself in practice for many years. The valve is equipped with a black matt Viton O-rings that are oxygen-free.
Properties:
Variants: Right / LeftChromed brass
232 bar suitable
acc. EN 144-1
Screw-in thread M25x2
Connection thread DIN G5 / 8
smooth
robust
high quality workmanship
Delivery scope:
Mono valve expandable 12144 (page selectable)
O-ring
Riser pipe
%
POLARIS - Proline Rigging Kit 140mm - 184mm
€79.95*
€89.95*
(11.12% saved)
Tanks:
184mm
The Proline Rigging Kit is the ideal accessory to attach stage bottles, such as those used in Tec-Diving, to the equipment. The new Proline Tank Straps from Polaris with an extra large flap for dry diving gloves.
Variants:
140mm - 7L steel & 5.7L aluminum
152mm - 7L aluminum
171mm - 12L
184mm - 80cft
Properties:
Salt water and UV resistant
high rigidity
optimal hold
extremely hard-wearing
Scope of delivery:
2 Proline tank straps
2 rigging carabiners
Stainless steel clamp
Hose cover
line